Views: 0 Author: Site Editor Publish Time: 2025-11-21 Origin: Site
Tips for using anchor tension clamps mainly include the following aspects:
Preparation: Before using the anchor tension clamp, make sure all tools and equipment are intact and all accessories are complete. Check whether the tension gauge has a product certificate. It is prohibited to use it without a product certificate.
Installation and zeroing: Connect the anchor tension gauge to the fixed bracket to ensure that the connection is firm. Without any tension, press the "zeroing" button to adjust the reading of the tension gauge to zero.
Apply tension: Use the tension tool to apply a certain tension to the anchor. When applying tension, pay attention to the uniform application of force to avoid excessive force causing damage to the tension gauge.
Reading data: After the tension is applied stably, take the scale pointer on the tension gauge or the reading on the digital display as the measurement result. Record the measured tension value and mark the corresponding anchor mark for subsequent analysis and use.
Safe operation: When inspecting anchor bolt preload, a dedicated person must be responsible for installing the puller, operating and monitoring. When inspecting top anchor bolts, personnel must stand on a stool to ensure safety.
Maintenance and care: After use, clean the dynamometer and fixing bracket in time to ensure that they are clean and well stored. Handle with care to prevent vibration and prevent dust and dirt from entering the equipment.
