Views: 0 Author: Site Editor Publish Time: 2026-03-09 Origin: Site
Product descriptions from the supplier
Warning/Disclaimer
WIRE VISE The WIRE VSE and FAST SPLICE can fasten H-T wires wthout a tool Merely insert the wires into the holes. The wires are gripped byspring-loaded clamps which tighten more securely as the wires are pulled harder, holding the wires at over 80% of the breaking strength ofthe wire itself.
The WIRE VSE is double sided for joining two ends of wre on in-line spices whereas the WIRE VSE is half of a WIRE VSE and is usedfor terminations at an end post. Each wire on a fence requires one WIRE VSE.
To use the FASTVSE, drila 3/8 inch hole through the end post and pull the wire through the hole. Then put the FASTVSE on the wire andtap itlighty into the hole. If final tensioning is to be done with the FASTVSE,itis recommended to pul the wire to the end postwith a chaingrab, then push the slack through the hole and FASTVSE Aspecial tightening tool (TVT)is also avallable for use with the FASTVSE. Itgrabs the wre which has been threaded into the FASTViSE and a simple prying acton pulls he wre through the FASTVISE to the desiredtension.
ATWR wire release tool can be used to remove most 12. 5 gauge FASTSPLICE from the fence wire. This alws the WIRE VSE to bereused if care is taken during both initial installation and later removal
