Views: 0 Author: Site Editor Publish Time: 2025-12-29 Origin: Site
The installation methods of the suspension bracket mainly include the following types: ground installation, wall installation, roof installation and underground installation.
Ground installation method
Clean the installation area: Make sure the ground is flat and clean up debris and gravel.
Dig and fill: Dig a hole about 20 cm deep and slightly larger in diameter than the bracket, and fill it with stones, cement or cement mortar.
Wall installation method
Select the installation area and wall material: Determine the appropriate installation location and wall material.
Drilling and fixing: Drill holes on the wall, fix with buttons or expansion screws, align the bracket with the wall horizontally and tighten the bolts.
Roof installation method
Determine the position and load-bearing capacity: Select a suitable installation location and ensure the load-bearing capacity of the roof.
Fix the bracket: Fix the bracket components with screws, and pay attention to the maintenance and drainage factors of the roof.
Underground installation method
Determine the position and bracket size: Select a suitable installation location and dig a rectangular hole.
Place the bracket: Place the bracket in the hole, add sand and mud to compact it, cover the soil, and fix it with cement.
Notes
Clean the installation surface: Make sure the installation surface is clean and remove dust, oil and other impurities to ensure the firmness of the adhesive or fixings.
Choose a suitable location: Choose a location that is both stable and easy to operate, and ensure that the location can bear the weight of the bracket and the equipment placed, while avoiding blocking the normal use of other furniture or electrical appliances.
