gtag('config', 'AW-343309254', {'allow_enhanced_conversions':true});   var enhanced_conversion_data;
      |        +86 13003789486
You are here: Home » Cases
  • How do you use one way anchor vise bulid a trellis for grapes?

    Chicken wire trellis is an inexpensive and simple vegetable trellis. It helps you build a vertical gardening and ensures clean and fresh fruits in harvest season. Once trellis used in your garden, climbing vegetables will not take up so much place while producing more fruits than before. anchor vise Read More

  • How does a wirevise work?

    Drill a hole through the end post and pull the high-tensile wire through. Then put the wire vise on the high-tensile wire and tap it lightly into the hole. If final tensioning is to be done, pull the high-tensile wire to the end post with a chain grab, then push the slack through the wire vise Simpl Read More

  • Introduction of one-way vise

    Introduction of one-way viseOne-way vise is a great tool for building a professional looking trellis, vineyard, fence, or arbor · Easy use and installation opens up a world of possible applicationsSince this is a one way anchor, you just have to pull on one end to remove any slack in the wire. It st Read More

  • Advantages of using wirevise

    AdvantageTime savingAnchor vises will save you time and money when it comes to tightening wires. No need to replace wires or use joiners to tighten them. Once you install your anchor vises you will only need to pull the wires when you feel they need tightening. They will hold in place without slippi Read More

  • Recommendations for use

    Recommendations for useThis 12.5 gauge one way anchor vise has many applications. It is most often use to build trellises. It can be used with many high tension applications like wire fence, coated wire fence, rail fence and any 12.5 gauge fence. First, before you begin shoving the wire through, loo Read More

  • What is wirevise

    How to useOur Wire vises keep your wire tightened preventing it from slipping back and conveniently securing it to the post.Easy to use, just insert the wire into the long narrow end of the vise towards the plate end and pull from the other side. Once inserted the wire holds in place and can only be Read More